User guide
Chapter 1
Introduction
The CORVUS SYSTEMS CP/M USER GUIDE provides you
wit~
a general introduction to the Corvus hard disk system, the Mirrol
option for backup of data, the pipes and
spooling features for
movin~
files between computers and peripherals, trouble-shooting pro-
cedures, and diagnostic programs. Your Corvus hard disk system
should already
be
installed and configured for a single
user.
Please
retain
your
installation guide for future reference.
The
CORVUS SYSTEMS CP/M USER GUIDE
is
used with
the
following computers:
-
TRS-80TM
Model"
(under CP/M)
-XEROX
820™
-Zenith
Z-89
or
Z-90
-Intertec
SuperBrainTM
-NEC
PC-8001, PC-8001A
or
PC-8800
-S-100
Bus Systems,
for
example:
• Cromemco™
(under CP/M)
• CCS (California Computer Systems)
• Dynabyte
• North
Star™
• Vector Graphics
as
well
as
other systems. Consult with
your
dealer if you wish
infor~
mation about a specific computer system
or
a particular model.
This guide and other Corvus manuals do not take the place of
the operating system and
language manuals provided by the manu-
facturer
of
your
computer. It
is
presumed that you have a working
knowledge
of
your computer system hardware and software.
For more detailed information on Corvus software, refer to the
CORVUS SYSTEMS CP/M PROGRAMMER'S REFERENCE GUIDE.
For information on mUlti-user configurations, refer to the CORVUS
SYSTEMS MULTIPLEXER INSTALLATION
GUIDEforyourcomputer.
CP/M
is
a registered trademark of Digital Research, Inc.
Corvus Mirror® is a registered trademark
of
Corvus Systems, Inc.
TRS-80
is
a trademark of Tandy Corporation.
XEROX and
820
are registered trademarks of XEROX Corporation.
Cromemco is a trademark
of
Cromemco, Inc.
North Star
is
a trademark
of
North Star Computers, Inc.