User guide

3. Load the Mirror program from the CORVUS UTILITIES VOL. 1
diskette in Drive B by typing
MIRROR and pressing <RETURN>.
The screen
displays:
4. Press V for Verify option. The screen displays:
START RECORDER AT BEGINNING IF IMAGE
VERIFY IN PROGRESS
5. Start the VCR playing (not recording). When the Verify procedure
is finished, the screen
displays (for example):
--- ERROR STATISTICS ---
# SOFT ERRORS : 3
# DISK ERRORS : 0
# OF BLOCKS NEEDING RETRYS : 0
( ALL DATA RECEIVED
Sometimes soft errors will appear. However, this is no problem
since all data is recorded four times.
How to Use the Identify Option on the Mirror
1. Rewind the video cassette to the start of the tape, or to the loca-
tion on the cassette you copied down earlier. Since the Identify
option searches for the very first characters of the header block,
it is important to rewind the video cassette completely to avoid
missing the header.
17