User guide

13. Make sure the VCR is on, and the video cassette is loaded
properly. Write down the
VCR counter number on a piece of
paper .and save it.
Start the VCR recording (on most recorders
you will have to press both the play and record buttons). Press
<RETURN>. The screen displays:
WAITING FOR RECORDER TO SPEED UP ...
After about a half a minute, the screen displays:
> -BACKUP HAS STARTED
14. When Backup is finished, the screen displays:
BACKUP
DONE- NO DISK ERROR,S
TASK (L TO LIST) : _
15. Now stop the VCR and copy down the VCR counter number. If
you do record more than one image on a cassette, it is recom-
mended that a gap
be left between different virtual drives, so that
the initial header blocks can
be located easier.
How to Use the Verify Option on the Mirror
1. Rewind the video cassette to the start of the tape, or to the loca-
tion on the cassette you copied down earlier.
2. Your computer should be operating under CP/M. The Corvus
drive should be on and the Corvus link established. The Mirror
and
VCR hardware should be connected.
16