Instruction manual

1. Power off all equipment.
2. Place the disk unit on a flat surface, on its base. Be sure the
disk drive has adequate ventilation. Also, protect the disk
from strong electronic fields by not placing power cords or
other electro-magentic field generating equipment on top
of the drive container.
Since
the Corvus disk system is a precision instrument, it
must be handled carefully. The disk drive must not be
operated when the unit is upside down or at an incline.
To
ensure cool running equipment, the air flow slots
located
at the rear of the drive container should not be
blocked . Also, avoid putting the unit in a sealed container
(such as in a box or drawer).
Connects
to Video
Recorder
Connects to
Video Remote
rol
Connects Connects
to Interface to Add·on Air Flow Slots
Drive (if a y)
DRIVE
~ : 1 --- -
III
Mirror Dip Switches Power SWitch Connects
to AC Cable
Drive Cabinet Back Panel
6