Installation guide

6.
7.
Connect one end of the new
piece of cable to the tap box.
In one half of the tap box are two wire
guides.
Push the black wire at one end of the
piece
of cable into the BLACI( wire guide.
Push the red wire into the RED wire guide.
Connecting New Cable
to the Tap Box
Connect a cut end of the
OMNINET cable'to the tap box.
Push the black and red wires from one of the
cut ends
of the OMNINET cable into the
BLACI(
and RED wire guides on top of the
wires from the cable piece. Make sure
that
both red wires are together in the RED wire
guide
and both black wires are together in
the BLACI( wire guide.
Connecting the OMNINET Cable End
to the Tap Box
26