Installation guide

3.
4.
Insert the cable wires
into the tap box.
In one half of the tap box are two wire guides.
Push the black wire from the
OMNINET cable
into the BLACI( wire guide
and the red wire
into the
RED wire guide.
Cable Wires Inserted into the Tap Box
Put a resistor
into the tap box.
Inside the other half of the tap box are two
metal pieces
with notches in the side. Take
one
of the Corvus supplied resistors and insert
one lead into each of the notches.
Resistor Inserted into
the Other Half of the Tap Box
18