Frequently Asked Questions

1. After entering the webpage, the default state is "navigation mode". After pushing the
machine to the obvious point of the feature point, click "building mode" to enter the
following picture state and you can start scanning. The following teaches you how to scan
the map.
① Get ip from ReemanFtp software
② Switch to drawing mode
③ You can turn on the emergency stop switch and click the button to control the robot, or
use the up, down, left and right direction keys on the keyboard to control the robot to build
the map, or you can press the emergency stop switch to push the machine to build the map
2. After entering the "Building Mode", the machine will turn around in-situ to clear the
surrounding feature points. When turning, the speed should not be too fast. After one turn,
7