Frequently Asked Questions

2. Open the ReemanFtp application to enter the following interface, and follow the steps
shown in the figure. If the wifi password already exists, simply click "Send wifi information
to connect ROS".
① Check the WiFi name to be connected
② Enter WiFi password
③ Send WiFi information to navigation system
④ Observe the connection status
⑤ If ip is displayed, the connection is successful (127.0.0.1 is displayed indicating that
the connection failed)
3. The image scanning device must be connected to the same LAN as the machine, open the
browser and enter the machine IP address (recommended to use the chrome browser)
Note: If the Wi-Fi connection fails, you can close the application and try again; if it still
fails,you can power off and restart the robot and try again.
Second step [ Build mode ]
➤ Robot vision and scanning range
 The viewing angle of the radar is 230 °, and the scanning range is the horizontal plane
of the radar height; the scanning distance is 30 meters.
 Ask people to stand behind and push the robot, or use the keyboard arrow keys to control
the construction
6