Frequently Asked Questions

The fourth step [ Navigation test ]
①The path planned by the robot to the target point
② The target point the robot is going to
③ Make sure that the emergency stop switch is on (red when it is off)
Instructions for use:
1. When selecting the target point, select as many working activity areas as possible after
the robot, and test more times.
2. During the navigation process, it is mainly observed whether the laser and the terrain
match during the robot's walking (the laser and the actual terrain match the correct
positioning).
3. If the location is easily lost in some areas, you can consider editing special areas,
editing maps,and adding QR codes according to specific scenarios.
4. If these methods are not effective, please contact the staff to evaluate and deal with
them according to the actual situation.
12