Owner`s manual

n installing the tCP/iP ProtoCol

Follow these instructions to install the TCP/IP Protocol on one of your PCs only after a

network card has been successfully installed inside the PC. These instructions are for

Windows 95, 98, and Millennium. For TCP/IP setup under Windows NT, 2000, or XP,

please refer to your Windows documentation.

1. Click the Start button. Choose Settings, and then Control Panel.

2. Double-click the Network icon. Your Network window should pop up. Select the

Conguration tab.

3. Click the Add button.

4. Double-click Protocol.

5. Highlight Microsoft under the list of manufacturers.

6. Find and double-click TCP/IP in the list to the right in Figure F-2.

aPPendIx b