Owner`s manual
Continued
76
A. Open the Router’s Web-based Utility, as shown in “Section 6:” and go to the
Advanced section.
B. Now select forwards under the Firewall column.
C. With the Inbound tab selected, click on the button.
D. Select the Protocol type for the packets.
E. Either select an existing port, or place your own custom port in.
F. Put the IP address of the server in the Forwards IP box.
G. Select the port to forward the packets to. Most of the time this should be the same
as the External Port.
H. Give the forwarding rule a description to make it easy to nd.
I. Select auto-add to make the rule work right away.
J. When you have completed the conguration, click the Save button.
I am a PPPoE user, and I need to remove the proxy settings or the dial-up popup
window
If you have proxy settings, you need to disable these on your computer. Because the
Cortexa is the gateway for the Internet connection, the computer does not need any proxy
settings to gain access. Please follow these directions to verify that you do not have any
proxy settings and that the browser you use is set to connect directly to the LAN.
For Microsoft Internet Explorer 5.0 or higher:
A. Click Start, Settings, and Control Panel. Double-click Internet Options.
B. Click the Connections tab.
C. Click the LAN settings button and remove anything that is checked.
D. Click the OK button to go back to the previous screen.
E. Click the option Never dial a connection. This will remove any dial-up pop-ups for
PPPoE users.
For Netscape 4.7 or higher:
A. Start Netscape Navigator, and click Edit, Preferences, Advanced, and Proxies.
B. Make sure you have Direct connection to the Internet selected on this screen.
aPPendIx a