Owner`s manual
Continued
59
addiNg 1:1 forWards
Interface
Interface will be WAN in most cases.
External IP
The external IP will be set to the IP address you wish to map.
Internal subnet
In most cases this will be a single IP address on either your LAN or an optional interface like
a DMZ.
Description
Description is optional but recommended. After verifying your entries, click Save and Apply
Changes.
aliases
Aliases act as placeholders for real IP addresses and can be used to minimize the number of changes that have to be made if a
host or network address changes. You can enter the name of an alias instead of an IP address in all address elds that have a
blue background. The alias will be resolved to its current address according to the list below. If an alias cannot be resolved, e.g.
because it has been deleted, the corresponding element will be considered invalid and skipped.
statiC route
Paths through the network must be found and made available to the router so it knows the
best path on which to forward a packet to its destination. Static routing is the process a
network administrator uses to manually congure network routes.
Cortexa 7202 ConfIguratIon utIlIty