Owner`s manual
Continued
58
Auto-add a rewall rule to permit trafc through this Forward rule
We recommend you check this box in all circumstances. If you need to tighten the default
rule, you can do so later. If you don’t let the webGUI create the rule automatically, it’s more
likely to be incorrect or problematic.
Click Save, then Apply Changes. You will then see the result, similar to the following.
server forWards
If you want to use a public IP address other than the WAN interface address with Inbound
Forwards, you need to dene the address in Server Forwards rst.
1:1 forWard
1:1 Forward maps an internal IP to external IP, generally mapping a public IP address to
a private IP address and vice versa. When you assign a 1:1 Forward mapping, any trafc
coming from that host to the Internet will be NAT’ed to the dened external IP, and any
trafc coming into the external IP will be NAT’ed and passed to the internal IP if rewall
rules permit. (by default, the rewall rules do not allow any inbound trafc to 1:1 Forward
mappings). You can also map entire subnets with one entry.
Cortexa 7202 ConfIguratIon utIlIty