Owner`s manual

Continued
55
The Edit screen allows the ability to add and change your current rules:
• Action: Determines if the rule is a Passing or a Blocking rule.
• Disable: Allows you to disable the rule so you can save the settings for a later time.
• Interface: The interface that the packets must come in to match this rule.
• Protocol: The IP protocol that the packets must match for this rule.
• Source: Packet source.
• Source Port Range: The port that the packet is on and must match for this rule.
• Destination: Destination address the packets are trying to reach and if matched,
will be denied.
• Destination Port Range: The range of ports that are allowed for this rule.
• Fragments: Allows fractional packets to pass through.
• Description: Gives the rule a name to help nd it.
Cortexa 7202 ConfIguratIon utIlIty