Owner`s manual

Continued
46
Bridge with: Select the interface that you would like to bridge with. If an interface is
selected, then the IP address and Subnet Mask will be the same as the bridged interface.
If you opt not to bridge with another interface, you will need to setup an IP address and
Subnet Mask for the new local area network.
You may also change the description of the interface to make it easier to identify when
setting up rules and forwards.
network status
The Status page displays the Cortexa 7202 current status. It reects the data and selections
entered using the setup pages.
network traffiC
This allows you to view real-time network trafc on all interfaces, WAN and LAN. In order
to utilize this function, install the plug-in as directed. If using Mozilla Firefox, the following
step also needs to be performed.
Copy NPSVG6.dll and NPSVG6.zip to your browser’s plug-ins folder. These les are normally
located in C:\Program Files\Common Files\Adobe\SVG Viewer 6.0\Plugins\
interfaCe assignments
This allows you to assign network ports to an
Interface. You may also assign Virtual networks.
Cortexa 7202 ConfIguratIon utIlIty