Owner`s manual

Continued
13
n Configuring the router
This section details how to congure the Router within the Cortexa to manage your network
and gain access to the Internet through your Internet Service Provider (ISP). Your ISP may
require the use of a Host Name and Domain Name. You will need this information from
your ISP. If you do not have this information, please contact your ISP before proceeding.
Document any changes from default by printing the page before saving, and making notes
of passwords that are not displayed.
You will get a new login screen to gain access to the Cortexa 7202 Conguration Utility. Use
the same User name and Password as above. You will now be in the Cortexa Conguration
Utility. On the left of the screen each menu section will be highlighted in Blue with sub pages
below. Find the Interfaces Section and Click on Status.
The Cortexa 7202 WAN Interface Status will appear at the top of the page.
If the IP address has a valid address then you should be able to connect to the Internet.
Open another browser window and try to log on to a site you don’t normally visit, to avoid
loading a cached page.
You should now be at this login page. Enter admin
in the User Name eld, and cortexa (the default
password) in lowercase letters in the Password
eld. Optionally click on the box to remember
this password for subsequent logins with this user
name. Then click OK.
The Cortexa 7202 Home Page will appear. Click
on Tools to go to the conguration page.
You should now be at this login page. Enter admin
in the User Name eld, and cortexa (the default
password) in lowercase letters in the Password
eld. Optionally click on the box to remember
this password for subsequent logins with this user
name. Then click OK.
The Cortexa 7202 Home Page will appear. Click
on Tools to go to the conguration page.
InItIal networK setuP