Programming instructions

ROBOTC
VEXnet Upgrade Installation • 9
© Carnegie Mellon Robotics Academy / For use with VEX
®
Robotics Systems
Setup
VEXnet Upgrade Installation Instructions (cont.)
Part III. Manually Pairing the Microcontroller and Transmitter VEXnet Upgrades
2. Connect the Microcontroller and Transmitter VEXnet Upgrades using the USB cable.
2.ConnecttheVEXnetUpgrades
Use the USB A-to-A cable to connect the
Microcontroller and Transmitter VEXnet Upgrades.
Important Note:
Bundled Microcontroller and Transmitter VEXnet Upgrades are precongured to
automatically establish a link with each other. Only follow the steps to manually pair
your VEXnet Upgrades if you are having trouble establishing a connection between
them, or if you are using a Microcontroller VEXnet Upgrade that was NOT bundled
with a corresponding Transmitter VEXnet Upgrade.
1. Remove the USB adapters from the Microcontroller and Transmitter VEXnet Upgrades.