Programming instructions

ROBOTC
Driver Installation • 1
© 2007 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems
Setup
Driver Installation
You will need:
 1. A ROBOTC for IFI Installation CD or an Internet connection
 2.A VEX USB-to-Serial cable
In this lesson, you will learn how to install the USB-to-Serial Cable driver. Make
sure you have sufcient security privileges to install drivers on the computer
before you begin.
1. Plug the USB connector end into your computer.
1. Connectthecable
Plug the USB end of the
cable into the computer.