Programming instructions
ROBOTC
Firmware Inspection - Using IFI Loader • 4
©
2010 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems
5.PowerCycletheVEXMicrocontroller
Flip the small switch on your VEX Microcontroller
to turn your robot on. If it is already on, turn it off,
and then back on.
5. Once the Terminal Window is open, turn the VEX Microcontroller on. If it is already turned
on, turn it off, and then back on.
6. The Terminal Window will display both the master and ROBOTC user rmware.
The VEX Master rmware version should be at least 10.
The ROBOTC User rmware version should be at least 7.97.
Note: If either rmware is out of date, they can be downloaded using ROBOTC by going to the
Robot menu and selecting Download Firmare for the ROBOTC rmware, or Download IFI Master
Firmware for the master rmware.
If you download the master rmware, you must also download the ROBOTC rmware. After
downloading rmware, you must also re-download the user program to the VEX Microcontroller.
Firmware Inspection Using IFI Loader (cont.)
VEX ROBOTICS COMPETITION