Programming instructions

ROBOTC
VEX PIC Firmware Inspection - Using ROBOTC • 2
© 2011 Carnegie Mellon Robotics Academy / For use with VEX Robotics Systems
VEX PIC Firmware Inspection Using ROBOTC (cont.)
3. VerifythatthePlatformTypeinROBOTCissettoVEX0.5Microchip.
5. DifferentfeaturesandoptionsareavailableinROBOTCdependingonwhatmodeisset.
Changeto“Expert”modebygoingtoWindow>MenuLevelandselectingExpert.
4.TurntheVEXMicrocontrolleron
FlipthesmallswitchonyourVEXMicrocontrollerto
turnyourroboton,ifitisnotonalready.Makesure
thatachargedbatterypackisconnected.
4. IftheVEXMicrocontrollerisnotalreadyturnedon,turnitonnow.
VEX ROBOTICS COMPETITION