Quick Start Guide

8
Cradle position
A handset cradle can be mounted almost anywhere
where a WiFi connection to the M1 can be achieved.
HINT - The WiFi connection status
can be monitored by selecting the
WiFi icon in the blue Status Bar.
The Status Bar is displayed at the
top of all handset screens.
Consider the following power connection requirements
when choosing a cradle position:
H1 The spiral tether connects via a removable plug
to the Bulkhead Connector wired to power
(12V or 24V DC).
The spiral tether stretches to a maximum length
of approximately 2M (6ft).
H1P The H1P is held and recharged via a charging
cradle that is wired to power (12V or 24V DC).
CAUTION - Ensure that the minimum safe compass
distance is maintained. Standard: 0.8m, Steering: 0.4m.
H1 Cradle and Cover H1P Cradle and Cover
WiFi status