User Manual

Setup Guide

Parts Diagram and Functions

Rear Panel

1. AUDIO OUT L/R RCA connectors, side 1

RCA type unbalanced stereo audio output. These connectors output

audio signal generated from Side 1 of the HDC-1000 unit.

2. AUDIO OUT L/R RCA connectors, side 2

RCA type unbalanced stereo audio output. These connectors output

audio signal generated from Side 2 of the HDC-1000 unit.

3. USB connector (type A)

This connector is used to attach the USB mass storage device that con-

tains your music library. Suitable mass storage devices include, but are

not limited to: external hard drives, flash memory, portable digital

music players, CD/DVD-ROM drives, memory card readers, and active

USB hubs.

4. DC inlet w/security clamp

This connector is used in conjunction with the AC/DC adaptor to power

the unit. Next to the DC inlet connector is a security clamp, which can

be fastened over top of the cable to prevent it from being dislodged.