User Manual
BPM Instructions (revised)
The B.P.M. value determines the Tempo that any particular
song plays at.
The HDC-3000 will automatically calculate and display this
Tempo as a numerical value known as B.P.M.(Beats Per
Minute).
The BPM button, (see Figure 1) has Three modes Auto, Manual
and Off.
By pressing and holding the button for 2 sec you can access
each mode individually.
(the main display will momentarily flash which mode you are in
where the song title is normally shown)
AUTO MODE
The HDC-3000 will calculate the BPM for you automatically.
MANUAL MODE
By using the BPM button to TAP-IN the tempo of the beat you
can manually input the BPM of any song.
In both the AUTO and MANUAL modes you can save the new
BPM info to the ID3 tag of the songs mp3 file info by holding
down the Shift button while pressing the BPM at the same time
(see figure 2).
Once stored this information is permanently written to the ID3
tag, but can always be overwritten by repeating this procedure.
OFF MODE
The HDC-3000 will not display or calculate BPM information.
BPM SEARCH
The HDC-3000 allows you to search by BPM so the more of
your files that have BPM information in thier ID3 tags the more
comprehensive the BPM search.
(Note: Songs with no BPM in thier ID3 tag will default to a BPM
value of zero.)
BPM Instructions (addendum)
HDC-3000
(figure # 1)
(figure # 2)
18(A)