User Manual

Setup Guide

Parts Diagram and Functions

Rear Panel

1. AUDI O OUT L/R XLR connectors (BALANCED)

XLR type balanced stereo audio output. These connectors output audio

signal generated from the HDC-500 unit.

2. AUDIO OUT L/R RCA connectors (UNBALANCED)

RCA type unbalanced stereo audio output. These connectors output

audio signal also generated from the HDC-500 unit.

NOTE: Both outputs can be used simultaneosly for example one output to

your mixer the other to a recording device.

3. USB connector (type A)

This connector is used to attach the USB mass storage device that con-

tains your music library. Suitable mass storage devices include, but are

not limited to: external hard drives, flash memory, portable digital

music players, CD/DVD-ROM drives, memory card readers, and active

USB hubs.

4. DC inlet w/security clamp

This connector is used in conjunction with the AC/DC adaptor to power

the unit. Next to the DC inlet connector is a security clamp, which can

be fastened over top of the cable to prevent it from being dislodged.