User's Guide
ActiveSense Portal User Guide
®™Trademarks of Corteva Agriscience and its affiliated companies. ©2021 Corteva
Rev 02 - Page 15 of 23
Signal Strength Icons:
UNKNOWN/OFFLINE
BAD
POOR
ACCEPTABLE
GOOD
EXCELLENT
Quick Tips:
1. If a sensor signal strength shows red with 1 bar, this does not necessarily mean it will lose its signal. Keep an eye on
these sensors and if you notice they tend to fall offline, move sensor/trap to a better location or install an additional
Hub.
2. If a sensor is offline, check to verify the sensor hasn’t been moved or misplaced. Attempt to deactivate and re-install
the sensor. If that does not resolve the issue, move sensor/trap closer to an existing Hub or install an additional Hub.