User manual

Basic Features Configuration

Note:

When you use the web interface: user name: admin password: admin(default)

Basic Network Setting

Htek IP Phone support three mode of Network: DHCP, Static, and PPPoE. The default mode is

DHCP, it will obtain IP address and other information automatically.

If your phone cannot contact a DHCP server for any reason, you need to configure a static IP

address manually.

When switch DHCP, Static IP and PPPoE to each other, or change the Static IP on webpage, it

will show the warning of restart as following.

WAN Port

To configure a static IP address via phone interface:

1. Press MenuSettingAdvanced Settings (password: admin) NetworkWANPort

Static mode.

2. Enter the parameters: IP, Netmask, Gateway, Pri. DNS(primary dns), sec. DNS(second DNS)

in the corresponding fields.