User guide

Gigabit Color IP Phone Using the Basic Call Functions
- 89 -
The format of http URL is like this: http://internal.server.net/help.xml?
This URL can be user defined. Replace internal.server.net by the server IP address.
The variable URL supported:
$mac
#MAC address
$ip
#IP address
$model
# Model of the phone
$firmware
# Firmware of the phone
$active_url
#SIP URI of current active account(when Imcoming call,
Outgoing call, Call established)
$active_user
#User account part of SIP URI from current active
account(when Imcoming call, Outgoing call, Call established)
$active_host
#Server part of SIP URI from current active account(when
Imcoming call, Outgoing call, Call established)
$local
#SIP URI of Callee(when Imcoming call, Outgoing call)
$remote
#SIP URI of Caller(when Imcoming call)
$display_local
#Display name of Caller(when Imcoming call, Outgoing call)
$display_remote
#Display name of Caller(when Imcoming call)
$call_id
#call_id (when Imcoming call, Outgoing call, Call established)
Active URI:
Enter the “http://Phone IP/cgi-bin/cgiServer.exx?key=xxx” in Browser address bar,
the phone will realizing the corresponding function. If you not login the web with the
user name and password, you will need to specify the user/password to confirm the
operation. The username/password can be added into the URI like: