User guide

Gigabit Color IP Phone Using the Advanced Phone Functions
- 116 -
Hold
The key can be configured as a hold key. You can use this key to hold and retrieve a call
during the conversation.
To assign the key as Hold:
1) Choose DSS Key->Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the “Type” field, choose Hold from the
list.
2) Press Confirm button to save the change.
DND
If the key is configured as DND key, you are allowed to activate the DND function
immediately when you press it. Press it again to deactivate DND mode.
To assign the key as DND:
1) Choose DSS Key->Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the “Type” field, choose DND from the
list.
2) Press Confirm button to save the change.
Redial
If the key is configured as Redial key, press this key under the idle status, it will enter
the Dialed Calls interface, then you can choose a line to call out by pressing the line
keys.
To assign the key as Redial:
1) Choose DSS Key->Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the “Type” field, and choose Redial from
the list.
2) Press Confirm button to save the change.
Call Return
When the key is configured as Call Return key you are allowed to dial the last phone call
you received.
To assign the key as Call Return:
1) Choose DSS Key->Line Key, choose one of the keys you want to make the
assignment, there is a pull-down menu in the “Type” field, and choose Call Return
from the list.
2) Press Confirm button to save the change.