User guide

Gigabit Color IP Phone Using the Advanced Phone Functions
- 113 -
Intercom
You can configure the key as Intercom mode and it is useful in an office environment as
a quick access to connect to the operator or the secretary.
To assign the key as Intercom:
1) Choose DSS Key->Line Key, choose one of the line keys you want to make the
assignment, there is a pull-down menu in the “Type” field, and choose Intercom
from the list.
2) Enter the feature code and the intercom number you want to intercom in the
“Value” field (for example: the feature code is *87, the intercom number is
0599123, and then user must enter the *870599123 in the “Value” field).
3) In the "Line" field, select a line to apply this key, the default one is Line 1.
4) Press Confirm button to save the change.
Note:
Your VoIP PBX must support this feature. And make sure the Intercom Allow is enabled.
DTMF
You are allowed to send out the desired DTMF number during the conversation. The
number needs to be set in advance.
To assign the key as DTMF:
1) Choose DSS Key->Line Key, choose one of the line keys you want to make the
assignment, there is a pull-down menu in the “Type” field, and choose DTMF from
the list.
2) In the “Value” field, enter the specific number.
3) Press Confirm button to save the change.
Prefix
When you set up the function of prefix, press this key, the phone will be ready to make
a new call, and show up the content which you’re set previously on the dial interface.
And you could enter other figure and call out
To assign the key as Prefix:
1) Choose DSS Key->Line Key, choose one of the line keys you want to make the
assignment, there is a pull-down menu in the “Type” field, and choose Prefix from
the list, and enter the number you want to show up on the dial interface in the
“Value” field.
2) Press Confirm button to save the change