Instruction manual

16
35
Modify PIN
This function allows you to change the PIN
number of the currently active Base. The default
PIN is 0000.
3. Use to choose menu,
press the soft key.
4. The display shows " ". Enter the current
PIN, then press the key. If the old PIN
code is correct, you will be prompted to enter
a new PIN code, otherwise a warning beep will
sound and the handset will return to the
menu.
5. Enter the new PIN, press the key. You
will be requested to confirm the PIN code.
Enter the new PIN again then press the
soft key to confirm and exit.
Modify PIN
Select
PIN?
Next
Modify PIN
Next
Save
1. Press the soft key.
2. Press or key to choose ,
then press the .
or key
Menu
BS Settings
Select soft key
BS Reset
BS Settings
Select soft key
If you reset the base, all the features under
menu will be restored to the factory
initial setting: Dial Mode and Flash Time.
3. Press to choose menu,
press the soft key. You will be
prompted to enter the PIN code.
4. Enter the PIN code (the default PIN is 0000),
then press the soft key. If the PIN
code is validated all Base settings will be
reset to the factory default, otherwise the
settings will remain.
After resetting, the handset will return
to standby mode.
BS
Settings
BS Reset
Select
Reset
Result:
1. Press the soft key.
2. Press or key to choose ,
then press the .
or key
Menu
Basic Functions
n Making a Call
You can enter the desired phone number in
standbymode,whichallowsyoutomake
corrections before dialing. Follow these steps:
1. Enter a telephone number (up to 32 digits).
Check it. You can also use the key to
insert a pause.
1. Pick up the handset and press the key.
3. To end the call, either press the
2. Dial a telephone number.
key
or replace the handset on the base.
Result: The indicator flashes and the
icon appears on the LCD.
In use
Note
Redial
:
To make a call to the last number you dialed,
use the feature. For details, see page
17.
Note
Erase
:
If you make a mistake while entering a
number, press the soft key to clear
thelastdigit.
2. When the number appears correctly, press
the key.
All descriptions in this manual assume that the handset is in standby mode. Set the telephone to
standby mode by pressing the key.