Instruction manual

11
40
n LCD Window Icons Description
New Call
Off Hook
Indicates you have missed one
or more calls.
Indicates the line is engaged.
MSG Waiting
Hands-free
Battery Icon
Indicates you have one or more
voice messages.
Indicates the handsfree function
is enabled.
Indicates battery charge level.
Signal Icon
Alarm Icon
Keypad lock
Indicates whether the current
signal exists or not. If the
handset is too far from the base,
this icon will blink on the LCD.
This icon appears when you set
an alarm to ring at a specified
time.
This icon appears when the
keypad is locked.
n Registration
The supplied handset is already registered with
the number 1.
you
should press and hold base unit key for about
5 seconds until the indicator starts
flashing rapidly
3. Use to scroll through the Base
names list, press the soft key to
chooseabasetoyournecessary.The
handset will search for the requested base
and the relevant information will flash on
the LCD.
You can register to your base
additional handsets (up to 5 in total) in order to
share the same line with other people.
Before registering a handset to the base,
.
In Use
Registration
Select
1. Press the soft key.
2. Press or key repeatedly to choose
the , then press the
.
or key
Menu
Select
soft key
4. If the base is found, you will be prompted to
enter the PIN code (the default one is 0000).
Enter it then press the
PIN code is correct, the Registration tone will
sound and then the base assigns a number to
the handset, otherwise a warning tone will
sound, and then the handset returns to the
previous registration state.
5. If the base is not found, the handset will
behave according to the Out of Range
condition.
the . IfSelect soft key