Specifications

1. Fromthe“Phones”node,inthemanagementconsole,selectthephonestowhichyouwant
toapplythechangestoimmediately.Youcanselectmultiplephonesatoncebyholdingthe
CtrltheShiftkeys.
2. Clickthe“ReprovisionPhones”button.
3. Thephoneswillrestartandapplythedesiredchanges.
ProvisioningCisco,PolycomPhones
Cisco and Polycom phones do not support plug and play and must be provisioned using the
followingmethod.
Step1–ConfiguringtheExtensionsforProvisioning
ProvisioningaPhone
1. Fromthe“Extensions”node,intheManagementConsole,selecttheextensionyouwantto
provision,click“EditExtension”>“PhoneProvisioning”tab.
2. EntertheMACaddressofthephone(whichcanbefoundatthebottomofthephone)inthe
MACaddressfield.
3. SelecttheappropriatephonemodelfromthedropdownmenuoftheModellist.
4. Phone Web Page Password – This is auto generated by the 3CX Phone System and is
applied to your phone upon provisioning. If you want to log in to your IP Phone’s Web
Interface then use the value in the “Password field” on the Web Interface login screen
(Username is not changed in the Phone’s Web Interface it remains to its default value 
admin even after provisioning). You may leave the Web Page Password as is or specify
yourown.
5. Confirm the IP address which the phone should connect to (in case your phone system
serverhasmultiplenetworkinterfaces).