User manual

8
10. Press the key twice, then press numeric key “3”and hold until the screen display “ARE YOU
SURE”. Press the key, the screen will display “CHANGING”, which means that the phone is
trying to switch to PPPoE mode. If the icon “PPPoE” on the top of the screen keeps blink, it shows that the
phone is trying to access the PPPoE server, and the IP is still static IP if you press key to
display the current IP; if the icon “PPPoE” is showed without blink, it means that the phone has already
gotten IP from PPPoE server.
2.2.2. Static IP mode:
1. Press the 1 key for three seconds, then confirm it by the key, your phone network connection
mode will switch into Static IP mode. Prepare your phone’s network parameters. They are IP Address of this
phone, Subnet Mask, Default Gateway/ Router and DNS. You can ask your VoIP service provider for those
parameters.
2. Press the key, the LCD screen will display “INPUT PASSWORD”.
3. Input password (default is 123), then press the key, the LCD screen will display” NETWORK”.
4. Press the key, and the LCD screen will display “LAN”. Press the key, then the
key, the LCD screen will display “STATIC NET”.
5. Press the key, the LCD screen will display “IP”. Press the key again and then the
key, input your desired IP address for your IP phone and confirmed by pressing the key, then
the LCD will display the inputted IP address. When inputting IP with keypad, use “*” instead of “.”.
6. Press the key to return to previous menu, and then press the key, the LCD screen will
display “DNS2”. Press the key then the key, input your spare DNS address and confirm it by
pressing the key, and then the LCD will display the inputted DNS address.
7. Press the key to return to previous menu, and then press the key, the LCD screen will