User manual

SIP Config

Field name explanation

Choose the sip line to set info about SIP;there are 2 lines to choose. You can switch by 【Load】

button.

Status Shows if the phone has been registered the SIP server or not; or

so, show Unapplied.

Server Name Set the server name.

Server Address Input your SIP server address.

Server Port Set your SIP server port.

Authentication User Input your SIP registered account name.

AuthenticationPassword Input your SIP registered password.

SIP User Input the phone number assigned by your VoIP service provider.

Phone will not register if there is no phone number configured.

Display Name Set the display name.