User manual

Wizard

Field Name Explanation

Please select the proper network mode according to the network condition. FV6030 provide

three different network settings:

 Static IP: If your ISP server provides you the static IP address, please select this mode, and

then finish Static Mode setting. If you don’t know about parameters of Static Mode

setting, please ask your ISP for them.

 DHCP: In this mode, you will get the information from the DHCP server automatically;

need not to input this information artificially.

 PPPoE: In this mode, your must input your ADSL account and password.

You can also refer to 3.2.1 Network setting to speed setting your network.

Choose Static IP MODE，click【NEXT】can config the network and SIP(default SIP1)easily,

also can browse them too. Click【BACK】can return to the last page.

IP Address Input the IP address distributed to you.

Subnet Mask Input the Subnet Mask distributed to you.

IP Gateway Input the Gateway address distributed to you.

DNS Domain Set DNS domain postfix. When the domain which you inputted can

not be parsed, phone will automatically add this domain to the end

of the domain which you inputted before and parse it again.

Primary DNS Input your primary DNS server address.

Secondary DNS Input your Secondary DNS server address.

Display Name If user set the display name, caller will show this display name.

Server Address Input your SIP server address.

Server Port Set your SIP server port.

Authentication User Input your SIP registered account name.

Authentication Password

Input your SIP registered password.

SIP User Input the phone number assigned by your VOIP service provider.

Enable Registration Start to register or not by selecting it or not.