Programming instructions

Disc
The ―DISC‖ (DISCONNECT) key is a 2 second electronic timed line break. The key can be
used to automatically hang-up the call that you are currently on and regain a new dial
tone to establish a new call.
To use:
Simply press the ―DISC‖ key when the conversation is complete.
The ―DISC‖ key can be used in Speaker mode, on-hook, off-hook or conference.
The ―DISC‖ key can be used with headset or handset activation.
The ―DISC‖ key provides a convenient way to disconnect the line when not using the
handset.
―DISC‖ can also be used as a quit or escape function when in Caller ID log or
programming mode.
Speaker
To use, simply press the ―SPEAKER‖ key when placing or answering a call. The telephone
line will activate automatically.
The LED above the ―SPEAKER‖ key will illuminate to indicate that the speakerphone is in-
use.
To hang-up, press the ―SPEAKER‖ key again.
To use the handset, pick up the handset from the cradle and the handset will be active.
The speakerphone will disconnect.
To re-activate the ―SPEAKER‖ key, press the ―SPEAKER‖ key and place the handset back
into the cradle.