Programming instructions

LP550 Single Line Caller ID Phone
The LP550 version of the SLS-CID phone offers certain functions that are unavailable on
our standard single line models. These features include a caller ID log, programmable
speed dial keys and other special functions such as headset, speaker, etc.
Note: The LP550 differs from the SP550. The LP does not have a phonebook nor does it
have selectable ring tones.
Caller ID Display
Your phone needs to ring twice to display caller id.
10 Digit Telephone Numbers: All calls, even campus calls, will display area code plus 7-
digit number.
Out of Area: Campus calls that do not have a ―name‖ assigned to the phone number will
display ―out of area‖. ―Out of Area‖ is the default when no name is available on a call.
Caller ID Log
Total: Number of entries in your log -- (maximum 100 numbers)
New: Number of entries that you have not previously viewed. Please note: This number
has nothing to do with voice mail messages. You can have one voice mail message and
delete it; however, you will still see 01 NEW in your log until you view that entry.
To delete an entry, press the DELETE key twice . To delete the entire list, hold the
DELETE key down for 6 seconds; press DELETE key again .
Dialing from Caller ID Log
If you wish to dial a number from the Caller ID log, use the EDIT function described
below to make sure the digits displayed are in the correct dialing format and press the
dial key.
EDIT
Edit Caller ID Log numbers by pressing any key of the key pad to enter the edit mode.
(Use DELETE key to remove numbers or press key-pad to add numbers such as 7 for an
outside line.)