Programming instructions

SP550 Single Line Caller Id Phone
The SP550 Single Line Caller ID model offers certain functions that are unavailable on
our standard single line phones. These features include a caller ID log, personal
directory, programmable speed dial keys, and other special functions such as selectable
ring tones and volume settings, headset key, speaker key, etc..
Caller ID Display
Your phone needs to ring twice to display caller ID.
Ten-Digit Telephone Numbers: Your display will always show area code plus 7-digit
number. Out of Area: Campus calls that do not have a ―name‖ assigned to
the phone number, will display ―out of area‖.
Caller ID Log
Total: Number of entries in your log. (maximum 100 numbers)
New: Number of entries that you have not previously viewed. Please note: This number
has nothing to do with voice mail messages.
To delete an entry, press the Delete key twice. To delete the entire list, hold the Delete
key down for 6 seconds until DELETE ALL appears. Touch Delete key again
to complete the delete all action.
Dialing from Caller ID Log
If you wish to dial a campus number from the Caller ID log, the phone has been
programmed to only dial the last 5 digits for campus extensions, even though
the area code and complete 7 digit number appear in the caller ID log.
EDIT Caller I.D. Log numbers by pressing any key. (Use the Delete key to remove
numbers, or press key-pad to add numbers such as 7 for an outside line)