Programming instructions

RELEASE
To end a conversation, press RELEASE once. The phone will go on hook for 1.5 seconds
and then go off hook again, allowing you to make another call.
RINGER CADENCE
To change the ringer cadence, touch the menu key 9 times until Ringer Cadence appears
in the display. To alter the setting, press Review Up arrow to listen to the 10 options.
When the desired ringer cadence is displayed, press MENU to confirm selection.
RINGER VOLUME
To adjust the ringer volume, press the menu key 10 times until Ringer Volume appears
in the display. Press Review Up arrow to alter the setting. There are 4 ringer volume
levels, plus off. When the desired setting is displayed, press MENU to confirm selection.
SPEAKER
To use, simply press the ―SPEAKER‖ key when placing or answering a call. The telephone
line will activate automatically.
The ―SPEAKER‖ key will illuminate to indicate that the speakerphone is in-use.
To hang-up, press the ―SPEAKER‖ key again.
To use the handset, pick up the handset from the cradle and the handset will be active.
The speakerphone will disconnect.
To re-activate the ―SPEAKER‖ key, press the ―SPEAKER‖ key and place the handset back
into the cradle.
VOICE MAIL
Voice Mail Access
The button labeled ―Voice Mail‖ can be used to access voice mail. To use, obtain a dial
tone and press the voice mail button. 40553 will be dialed for you.
Voice Mail Message Waiting Light
The lamp at the top of the display screen flashes to indicate there is a message in voice
mail.