Programming instructions

2. After the desired number is selected, dial the number by pressing REDIAL again,
lifting the handset, pressing SPEAKER or pressing DIAL.
3. The selected number (32 digits maximum) will be redialed. Note: For security
reasons, only the first 8 digits of the number will be displayed, even though all the
digits will be dialed.
Using the Directory
This unit can store the numbers of up to 99 contacts in the directory. Names are sorted
alphabetically starting with the first character. (To sort the Directory by the last name,
enter the last name first.)
STORING ENTRIES
Press SAVE to store a number in the Directory. After pressing SAVE, the display will show
[Save To?]. Press DIRECTORY. [Enter Number>] will appear in the display.
Enter the desired number using the keypad. Remember to enter the number in
appropriate dialing format, using 7 for off campus, etc. (max 24 digits). Press SAVE to
confirm.
[Enter Name] will appear. Type the name using the keypad. Press SAVE again to confirm
all settings. [Number Stored] will show briefly.
Note: If an incorrect letter is accidentally selected, press the down review arrow and start
over. All letters are upper case. To enter a space when storing a name or number, press
the up review arrow. Use the ―#‖ key to edit entries.
FINDING ITEMS
Press DIRECTORY to enter the Directory Review Mode. The first entry in the Directory is
displayed. The Down and Up Review Arrows may be used to scroll through the directory.
To leave the directory at any time, press DIRECTORY.
To search for a directory entry, press DIRECTORY; then, use the keypad to type the
desired name.
DIALING DIRECTORY NUMBERS
Find the number you want to dial in the Directory List. (Telephone can be on or off hook)
When the number shows on the display, press DIAL to start dialing.
DELETING ITEMS
Deleting Individual Entries
Enter the directory and select the individual entry. To delete an individual entry, press
DELETE once and then press 1 to confirm or 2 to cancel. The display will be erased and
the remaining items will be re-sorted.
Deleting All Entries
Enter the directory. To delete all entries, press and hold DELETE button. [DELETE ALL]
will appear in the display, select (1) for YES or (2) for NO. [NO RECORDS] appears in the
display confirming there are no directory entries in memory.