Programming instructions

SPEED CALL
Speed calling allows a user to program a list of frequently called numbers and then
place a call by dialing a code instead of the complete number.
A speed call list provides access to telephone numbers using either a short list or a long
list. A short list allows you to store 10 numbers, and a long list allows you to store 30 or
50 numbers.
1
To program or update a short list...
Lift handset
KEY IN * 7 4
(listen for special dial tone)
KEY IN desired speed call code (0-9) followed by the number to be stored. (Remember
to include 7 for off campus, 7 +1 for long distance, etc.)
KEY IN #
(listen for confirmation tone)
To program or update a long list…
Lift handset
KEY IN * 7 5
(listen for special dial tone)
KEY IN desired speed call code (00-29) or (00 -49) followed by the number to be stored.
(Remember to include 7 for off campus preceding your number to be stored.)
KEY IN #
(listen for confirmation tone)
To place a speed call...
Lift handset
KEY IN * + one or two digit code
1
Wait as call is processed.
1
One-digit codes (0 - 9) are used for a speed call short list. Two-digit codes are used
for a long list (00-29) or (00-49). The size of your list has been preprogrammed. Some
phones are programmed as users of speed call long lists only and cannot program or
store numbers. Contact Telecommunications for requested changes.
Note: Up to 24 digits can be programmed for speed call. To store a pause between
digits use *. Your personal authorization code cannot be stored in a speed call list .