Programming instructions

SIMRING
Allows a user to create a group of up to five phone numbers that can be set to ring
simultaneously.
Once SimRing has been added to a line (the Pilot Directory Number), the user will need
to access the SimRing Controller to add telephone numbers to the SimRing group and
turn the service on or off. A PIN code is assigned to access the SimRing controller when
away from your Pilot Directory Number.
To access the SimRing Controller…
From phone with Pilot Directory Number
- KEY IN # 4 1
(listen to prompts for instructions)
To turn SimRing off or on
- KEY IN 3
To add an entry
1
(limit of four phone numbers)
-KEY IN #
To remove one or more entries
-KEY IN *
To hear the entries on your list
-KEY IN 1
[continued]
1
All telephone numbers in your SimRing list must be able to be dialed as a local call.
Remember to include ―7‖ for off-campus entries.