Programming instructions

HOLD
Allows you to place an existing call on hold.
(To use HOLD on Spectrum 550and the Cortelco 2730 sets, see special instructions at the end of
this document.)
To allow caller to hear Music on Hold, rather than silence, use the system hold:
Ask caller to hold
FLASH
(listen for special dial tone)
KEY IN * 6 8
(listen for confirmation tone)
Hang up
To return to held call...
Lift handset
OR
If you simply placed the handset down without hanging up, hold down the hookswitch
for two seconds to return to the held call.
To put call on hold using the HOLD key…(no music is heard)
Ask caller to hold
Press HOLD key
(HOLD LED will flash)
Hang up
To return to the held call…
Lift handset
OR
If you simply placed the handset down without hanging up, touch the HOLD key again
to return to the call.
Note: If *68 is used to place a call on hold, your phone will ring after 60 seconds as a
reminder that a call is being held. You cannot place another call if hold is activated.