User Guide

Datalog 3 - SMS Software Application Sheet

Sony HSR-1P - Page 2 of

CORTECH DEVELOPMENTS LTD

Setting Up the Sony HSR-1P

Before using the Video recorder the unit must be programmed with:

Camera Connection

Monitor Display Structure

Play Display structure

Normal recording mode(s)

Alarm recording mode.

These options can not be set through the Datalog 3 system.

The date and time will be synchronised to the Datalog system on program start or whenever the

Datalog time/date is changed.

The Datalog system must be set up to inform the Datalog which monitors are connected to the

Sony HSR and to assign up to 3, out of the maximum 16, camera inputs to a Datalog zone to be

recorded when that zone is in alarm.

To achieve this:

Click ‘Log on’ button (or press F10 key)

Enter a valid password

Select System menu

Select User Setup menu option

Click ‘Sony HSR’ button

The following form will display listing all the Datalog zones: