User Guide

Datalog 3 - SMS Software Application Sheet
Microtech Galaxy 500/512 Panel
Page 7 of 8
CORTECH DEVELOPMENTS LTD
Panel Number Field
The panel number field is only visible if there is more than 1 Galaxy Panel connected to the
Datalog. Using the up/down buttons allows a different panel to be selected. If using the Remote
Keypad, viewing the event log or switching relays, the required panel must be selected first.
Datalog Zone
Entering a Datalog zone number in this field and clicking the calculate button, will display the
Galaxy panel number and equivalent Line/Module/Input Zone number in the Galaxy Panel and
Zone field as N LMMZ.
Galaxy Zone Field
The Galaxy Panel and Zone fields contains the panel zone number on the panel as N LMMZ
where N is the Panel number, L is the panel line number, MM is the module number on that line,
and Z is the zone number on that module. Typing a relevant number and clicking the Calculate
button will display the equivalent Datalog zone number in the Datalog Zone field
.
Calculate Button
If a Datalog zone number has been entered in the Datalog Zone field then clicking the calculate
button, will display the Galaxy panel number and equivalent Line/Module/Input Zone number in the
Galaxy Panel and Zone field as N LMMZ.
Alternatively if the Galaxy Panel and Zone fields contains the panel zone number on the panel as N
LMMZ where N is the Panel number, L is the panel line number, MM is the module number on that
line, and Z is the zone number on that module, then clicking the Calculate button will display the
equivalent Datalog zone number in the Datalog Zone field.
Zone Information
Entering a Datalog zone or Galaxy panel and zone number then clicking the calculate button, will
display data about the zone. The line of data in blue text is the Datalog description for that zone.
The line of text below the description will show the Panel group to which the zone belongs, and the
urrent state of that zone on the Datalog system.