User manual

59
CORSAIR GAMING RGB KEYBOARD SOFTWARE USER MANUAL
to appear 6 keys after the first color� The
maximum value is 100�
4� In the Spread section, in the Velocity field,
type a number to specify how fast you want
the ripple to move, measured in keys per
second� The maximum value is 100�
5� In the Duration field, type a number to specify
how long you want the ripple effect to last, in
seconds� The maximum value is 100�
6� Click OK�
You can also duplicate lights, copy and paste lights,
delete lights, and perform additional actions�
DUPLICATING A LIGHT
1� In the lighting grid, right-click the source
marker, and then click Duplicate�
2� A marker of identical color and intensity will
appear in the lighting grid� You can adjust the
intensity and color, as needed�
COPYING AND PASTING A LIGHT
If you have two or more markers in the lighting grid,
you may copy the color from one and paste it into
another�
CREATING A
RIPPLE LIGHTING
EFFECT(Continued)
1� In the lighting grid, right-click the source
marker, and then click Copy�
2� Right-click the destination marker, and then
click Paste�
3� The destination marker will change to the
pasted color, but duration and intensity will
remain the same� Adjust the intensity and
color, as needed�
DELETING A LIGHT
In the lighting grid, right-click the marker, and then
click Delete�
CLEARING A LIGHT SECTION
If you have defined multiple markers for the ripple,
and want to delete all the markers prior to or after a
specific marker, you can clear multiple lights at once�
• To clear all the lights to the right of a marker,
right-click the marker, and then click Clear
to right�
• To clear all the lights to the left of a marker,
right-click the marker, and then click Clear
to left�
LIGHTING EFFECTS