User manual

49
CORSAIR GAMING RGB KEYBOARD SOFTWARE USER MANUAL
– In the device image, right-click the
highlighted group, and then click Assign
New Lighting�
a� The Foreground Lighting Editor
dialog box appears� Create the lighting
you want to apply� See Lighting
Effects Overview for details on how to
create each of the lighting effects�
b� In the Start section, select the With
mode checkbox if you want the
foreground lighting to begin when the
mode is activated initially� Select the
On key press checkbox if you want
the foreground lighting to start when
one of the assigned keys is pressed�
c� In the End section, select the After [x]
times checkbox and enter a number
if you want the foreground lighting to
end after a certain number of times�
The maximum value is 99� Select the
On key press checkbox if you want
the foreground lighting to end when
one of the assigned keys is released�
Note: All keys in a lighting group must share the
same foreground lighting�
EDITING FOREGROUND LIGHTING
If you want to change the characteristics of a
foreground lighting, you can do so� Changes made
to foreground lighting will be saved in the lighting
database, so that other keys or groups that use the
same lighting will also be affected�
In the Corsair Utility Engine, in the Profiles menu,
1� In the profile drop-down list, click the profile
you want to use�
2� In the mode list, click the mode you want to
use� If only one mode is defined, it is selected
by default�
3� In the right pane, click the Lighting tab�
4� An image of the device appears in the lighting
tab� If the foreground lighting is assigned to a
group, click the group name in the group bar�
5� In the device image, right-click the key, and
then click Edit light�
6� The Foreground Lighting Editor dialog box
appears� Edit the lighting to suit your needs,
and then click OK� For additional details on
editing lighting effects, see Lighting Effects
Overview�
FOREGROUND
LIGHTING (Continued)
LIGHTING EFFECTS