User manual

48
CORSAIR GAMING RGB KEYBOARD SOFTWARE USER MANUAL
a� The Foreground Lighting Editor
dialog box appears� Create the
lighting you want to apply� See
Lighting Efffects Overview for
details on how to create each of the
lighting effects�
b� In the Start section, select the
With mode checkbox if you want
the foreground lighting to begin
when the mode is activated initially�
Select the On key press checkbox
if you want the foreground lighting
to start when one of the assigned
keys is pressed�
c� In the End section, select the
After [x] times checkbox and
enter a number if you want the
foreground lighting to end after
a certain number of times� The
maximum value is 99� Select the
On key press checkbox if you
want the foreground lighting to
end when one of the assigned
keys is pressed� Select the On
key release checkbox if you want
the foreground lighting to end
when one of the assigned keys is
released�
ASSIGNING FOREGROUND LIGHTING TO A
LIGHTING GROUP
In the Corsair Utility Engine, in the Profiles menu,
1� In the profile drop-down list, click the profile
you want to use�
2� In the mode list, click the mode you want to
use� If only one mode is defined, it is selected
by default�
3� In the right pane, click the Lighting tab�
4� An image of the device appears in the
lighting tab� The group bar appears above the
device image, with left and right arrows to
scroll through groups� In the group bar, click
the name of the group you want to assign a
foreground lighting�
5� In the device image, the keys in the group
appear highlighted� Assign a foreground
lighting through one of the following methods:
– If you want to apply a lighting you have
already created, click Lightings List�
» The Lightings List dialog box appears�
Click and drag the lighting you want
to use on to the group, and then click
Close�
FOREGROUND
LIGHTING (Continued)
LIGHTING EFFECTS