Owners manual

Metal Shield Air Intake System
2011+ Charger/Challenger 6.4L
PN 616864-O/D
5/25/2017
INS616864
CORSA Performance·140 Blaze Industrial Pkwy·Berea, OH 44017 · P: [phone] ·F: [phone]
2
E - M a i l : s a l e s @ C O R S A p e r f o r m a n c e . c o m · w w w.C O R S A p e r f o r m a n c e . c o m
Please take time to read and understand these installation instructions.
CORSA recommends that the installation of this system be performed by a qualified service center or professional
installer who has the necessary equipment, tools and experienced personnel. However, if you decide to perform this
install the use of an additional person may be required.
CAUTION: Never work on a hot engine bay. Allow time for the vehicle to cool.
Recommended Tools:
 Flathead Screwdriver
 Assorted Socket-Set
 Ratchet
 Ratchet Extension
Please confirm that all parts are present according to the bill of materials before beginning the installation.
If something is missing call Tech Support at 1- 800-486-0999
Bill of Materials
1
616864-O/D - CORSA CAI
4
52064 - #64 Clamp
4
59012210 – Bolt 6mm x 16
1
652001 – Shield Spacer
1
612009-240 - Metal
Shield
3”
53206 – 4.0” Hump
Hose
1
59012213 – Bolt 6mm x 30
1
652002-240 - Shield Bracket
1
641036-240 - Metal Duct
1
53310 – Reducer 4”x3”
6
59020104 - Washer Flat ¼”
8.5”
53005 – Vacuum Hose 5/8”
1
5160/5161 - Air Filter
37”
56006 – Vinyl Trim
5
59020114 – Washer Lock ¼”
1
INS616864 - Instruction Sheet
1
460641 – Filter Adapter
1
652009 – Rubber
Grommet
1
59061210 – Nut 6mm
1
652014 - Corsa Performance Badge