Owners manual

dB Performance Exhaust System Installation
Cat-Back Exhaust System
2014 5.3L Silverado Sierra SSE
PN 24872 (133” WB); PN 24873 (143.5” WB);
PN 24874 (153” WB)
8/17/2016
INS5336
CORSA Performance · 140 Blaze Industrial Parkway · Berea, OH 44017 · Ph 440.891.0999
2
Email: [e-mail] corsaperformance.com
Please take time to read and understand these installation instructions.
We recommend that the installation of this system be performed by a qualified service center or professional muffler
installer who has the necessary equipment, tools and experienced personnel. However, if you decide to perform this
install, the use of a hoist and an additional person will be required.
CAUTION: Never work on a hot exhaust system. Allow time for the vehicle to cool. Always wear eye protection when
working under a vehicle.
Recommended Tools:
 Tape Measure
 Black Marking Pen
 15mm Deep Socket & Ratchet
 13mm Shallow Socket
 Chain Style Pipe Cutter
 Grommet Pullers
 Soap & Water Solution
 Torque Wrench
Please confirm that all parts are present before beginning the factory exhaust system removal and dB exhaust
system installation.
Bill of Materials:
1. Muffler Assembly (16SE2028)
2. Tip Assembly (16SE3023)
3. Headpipe Assembly:
133” WB (16SE4461)
143.5” WB (16SE4459)
155” WB (16SE4469)
4. Tailpipe Assembly (16SE4453)
5. Hardware Kit (20FF7030)